Back to top

2018 Azimut 54 Flybridge

West Palm Beach, Florida

 

"Arrow's Abyss" is a 2018 Azimut 54' Flybridge Motor Yacht featuring a spacious 3 stateroom 2 head layout with crew quarters.  She has 210 hours on Volvo D11's and is equipped with the latest Raymarine electronics, Seakeeper gyro stabilization, Xenta joystick controls, a hydraulic swim platform, and shows in like new condition.  

Basic Boat Info

Boat Name: Arrow's Abyss
Make: Azimut
Model: 54 Flybridge
Year: 2018
Condition: Used
Category: Power
Builder: Azimut
Designer: Stephano Righetti
Construction: Fiberglass
Boat Hull ID: XAX54179H718
Has Hull ID: Yes

Dimensions

Length: 54 ft
Length Overall: 54 ft
Beam: 16'3 ft
Max Draft: 3'3 ft
Displacement: 60,000 lb
Single Berths: 2
Double Berths: 2
Twin Berths: 1
Cabins Count: 3

Engines / Speed

Engines: 2
Engine #1 Specs:
  • Make: Volvo
  • Model: D11
  • Drive Type: V
  • Fuel: Diesel
  • Engine Power: 725hp
  • Type: Inboard
  • Year: 2018
  • Engine Hours: 210
  • Engine Location: Port
Engine #2 Specs:
  • Make: Volvo
  • Model: D11
  • Drive Type: V
  • Fuel: Diesel
  • Engine Power: 725hp
  • Type: Inboard
  • Year: 2018
  • Engine Hours: 210
  • Engine Location: Starboard
Total Engine Power: 1,450hp
Cruising Speed: 27 kn
Maximum Speed: 33 kn

Tanks

Fuel Tanks: 2
Fuel Tank Capacity: 303 gal
Fuel Tank Material: Aluminum
Water Tanks: 1
Water Tank Capacity: 156 gal
Holding Tank Count: 1
Holding Tank Capacity: 59 gal

Other

Heads Count: 2
Drive Type: V
Trim Tabs: Yes
Windlass Type: Hydraulic
Boat Class: Motor Yachts, Motor Yachts, Flybridge

Contact

Babb Rawlings
Babb Yachts

Office

Babb Yachts
4000 Hollywood Blvd. Suite 532-S
Hollywood, Florida, US, 33021
Tel:954-804-5421
Disclaimer

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.



Steering System
Joystick Control
Listing Details:

Fly Bridge

  • The large flybridge can be accessed from the portside staircase
  • Waterproof access hatch in aluminum and plexiglass
  • Smoked plexiglass windshield with stainless steel and aluminum frame
  • Stainless steel handrails
  • Helm station with adjustable steering wheel control 
  • L-shaped sofa joined with stern sunbathing area
  • Teak adjustable table with central leg in stainless steel
  • Freshwater sink 
  • Kenyon electric grill
  • Fixed convertible hard top with manual soft top insert
  • JL Audio speakers with Fusion head units 

 

 Cockpit

  • Access to the cockpit from a stainless steel and plexiglass gate
  • Large stainless steel sliding glass door
  • Large C shaped aft dinette with hi-gloss teak table
  • Cushions for cockpit bench 
  • Engine compartment access from cockpit floor 
  • Crew cabin access from the cockpit bench
  • Curved handrail on the stern platform 
  • Handrail for the fly bridge access staircase
  • Handles on cockpit bench arms
  • Lighting: spots on the ceiling
  • Hot and cold fresh water shower
  • JL speakers with Fusion head units

 

Salon & Dinette

  • Wrap around port side sofa with single pull out berth
  • Retractable salon TV to starboard
  • Bose surround sound 
  • Access to the lower deck via centerline staircase
  • Curtains for windows, aft, and sliding blind for salon door 
  • Rectangular table in dinette with center removable insert
  • Storage under the dinette sofa

 

Galley

  • Miele 3 burner ceramic-glass electric cook top with spill rail
  • Air extractor in ceiling with active carbon filters
  • Miele microwave / convection oven combo
  • Electric window

 

Master Cabin

  • Full beam mid ship
  • Queen bed placed diagonally
  • 2 reading lights
  • Oak wood headboard with storage behind
  • Large Portholes port and starboard
  • Vanity table with seats on port side
  • Storage under berth
  • Deck hatch (emergency exit above the bed)
  • Bulkhead covering in fabric and wood paneling 
  • Large closet with safe
  • TV system

 

Master Head Compartment

  • Entrance from master cabin
  • TECMA Head
  • Chrome-plated mixer tap
  • Separate shower with flat door
  • Cabinet with 2 sliding doors above washbasin top
  • Lighting: down light on cabinet and spots in the shower
  • Large Porthole

 

VIP Cabin

  • Double bed
  • 2 reading lights
  • Direct access to head compartment
  • Large Portholes port and starboard
  • Deck hatch

 

VIP Head / Day Head

  • Located aft of the VIP cabin, on port side
  • Entrance from the VIP or from Hallway
  • TECMA
  • Round shower cubicle (3 doors) 
  • Lighting: down light on cabinet and spots in the shower
  • Large Porthole

 

Guest Cabin

  • On starboard side
  • 2 single beds headboard with mirror and oak panels 
  • Custom Handcraft Mattresses
  • 1 night table between the two beds (2 opening compartments)  
  • 1 wardrobe with hanging rail and shelves
  • Large Porthole
  • Carpeted floor
  • 2 reading lights

 

Lower Helm Electronics

  • (2) Raymarine E125's (HT)
  • Raymarine autopilot P70R with control knob
  • Raymarine 72 mile radar
  • Raymarine VHF Raymic 260
  • Volvo Penta controls with Volvo engine displays
  • Xenta Joystick controls linking bow and stern thruster and gears
  • Dynamic Positioning System
  • Jabsco searchlight controls
  • Bennett Trim Tabs
  • Quick Chain counter windlass controller

 

Flybridge Electronics

  • (2) Raymarine E165 (HT)
  • Raymarine autopilot P70R with control knob
  • Raymarine 72 mile radar
  • Raymarine VHF Raymic 260
  • Volvo Penta controls with Volvo engine displays
  • Xenta Joystick Controls linking bow and stern thruster and gears
  • Dynamic Positioning System
  • Jabsco searchlight controls
  • Bennett Trim Tabs
  • Quick Chain Counter windlass controller
  • Raymarine P70R Autopilot w/ control knob
  • Raymarine VHF Raymic 260

 

Bow

  • Anchor peak with drainage and fenders compartment
  • Delta anchor
  • Calibrated anchor chain bow roller
  • Winch 1700 W
  • Two cleats in stainless steel
  • Large sunbathing area with convertible lounges
  • Chain washdown

 

Platform

  • Hydraulic lift
  • Teak deck on lift
  • Telescopic stainless steel swim ladder

 

 Walkways

  • (2) Fuel fillers 
  • Fresh water filler
  • Black water discharge outlet
  • Non-slip floor
  • Handrails on fly bridge
  • Stainless steel and high-strength PVC rub rail

 

Notable Features

  • Seakeeper Gyro Stabilizer
  • Xenta Joystick Control
  • Bow Thruster
  • Stern Thruster
  • Teak flooring on aft deck, stairs, and platform
  • Washer/dryer in master stateroom
  • Underwater lights
  • Salon icemaker
  • New 2021 Isotherm refrigerator in galley
  • Teak Hi-Gloss exterior tables 
  • Glendenning Cable Masters
  • Flybridge refrigerator and grill

 

Build Details

  • The structural project of the hull has been approved by RINA. This means a further guarantee of the quality of the structure and this is also confirmed by the use of state-of-the-art techniques and materials. Construction techniques and materials have been researched in depth to find the best possible combination of quality, weight and rigidity. The hull, main deck, inner-liners and structures have a sandwich structure with high-performance PVC core, to achieve maximum rigidity and impact resistance. These parts are laminated using infusion techniques, reducing the weight and increasing the quality level.
  • Vinyl ester resins are used for the lamination of the hull. This kind of resin guarantees a excellent resistance to osmosis. On the strength of this, Azimut is able to offer a 5-year warranty against osmosis. High quality isophthalic resin is used for the whole remaining lamination process.
  • Structural bulkheads have a sandwich structure with PVC core. The use of “next-generation” structural adhesives has been one of the key points in the process. The resulting bonding techniques and structural concepts have been checked by using an FEA model analysis. This calculation model, normally used by aeronautical and automotive companies, makes it possible to simulate the behavior of the boat under the most severe stress conditions, testing the structure in every single detail.
  • The frame of the superstructure has been reinforced by carbon fibers in order to increase the rigidity and reduce weight.
  • The planning hull has a 12° fore deadrise and 21° midship deadrise

 

Disclaimer

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.

Additional Contact Information

Babb Yachts 

954-804-5421   Babb@BabbYachts.com

Sales Broker Babb Rawlings


$
%
$
Disclaimer This calculator is intended solely for general informational purposes, and to provide a rough estimate based on the information you provide. You should not base your decision on this estimate alone.